PerformanceprobioticsCall (346) 391-7772

Pool Builders in Katy, TX

Custom Pools Built by a Veteran Katy Crew

Gunite, fiberglass, and vinyl-liner pools, spas, and full renovations, designed and built by a crew with decades of backyards behind them. Free on-site design consultations across the Katy area.

Call (346) 391-7772Talk to Our Lead Builder
  • Decades of local builds
  • VGB-compliant safety
  • Free design consults
Custom gunite pool build in Katy, TX

From the Crew

Field-tested advice drawn from decades of pool building.

Choosing a Pool Type for Your Katy Backyard

July 1, 2026

Comparing pool types for a Katy backyard

Every pool project starts with the same fork in the road: gunite, fiberglass, or vinyl-liner. After decades of building in Katy backyards, we can tell you there is no single right answer, only the right answer for your yard, your budget, and how your family swims. Here is how we help homeowners think it through.

Start With How You Will Use It

A pool built for laps and a pool built for a couple of kids and a spillover spa are not the same project. If you want a specific shape, a deep end, a tanning ledge, or a vanishing edge, gunite is the only build type that bends fully to your ideas. If you mostly want water in the ground fast with low upkeep, a molded shell may serve you better. We ask about the swimming before we ever talk materials.

Weigh Cost Against Lifespan

First cost and long-term cost pull in different directions. Vinyl-liner pools run the lowest to build, roughly $35,000 to $65,000, but the liner needs replacing every 7 to 12 years. Fiberglass lands in the middle and asks very little of you afterward. A custom gunite pool starts around $60,000 and climbs, but a pebble interior can go 15 to 25 years before it needs attention. Cheapest to build is rarely cheapest to own.

Factor In Your Lot and Access

Katy lots vary a lot from one neighborhood to the next. A one-piece fiberglass shell has to physically reach the backyard, which means a crane and a clear path, so a tight side yard near Peek Road can rule it out. Gunite is shot in place, so access matters less. We walk the lot early and flag any of this before it becomes a surprise on install day.

Do Not Skip the Structural Details

Whatever type you pick, the parts you never see decide how long the pool lasts. The rebar cage, the deck slope, and the equipotential bonding grid are where corners get cut by low bidders. Ask any builder how they handle those, and ask to see a finished job. An older pool with a tired surface is often a great candidate for a resurface and remodel rather than a full replacement.

Talk to a Builder Before You Decide

The fastest way to clarity is a walk of your own yard with someone who has built all three types nearby. We will lay out the real trade-offs for your space and hand you honest ranges, then let you sit with it. When you are ready, contact us and we will get you on the calendar.

Weighing your options for a Katy pool? Call Performanceprobiotics at (346) 391-7772 for a free on-site consultation.

Read the full article
  1. Decades in Katy backyardsA veteran crew that has built and renovated pools across Cinco Ranch, Seven Meadows, and Grand Lakes for years.
  2. A portfolio you can walkGunite freeforms, fiberglass installs, and full replasters we can point you to nearby before you sign.
  3. Built to code, built to lastSteel-reinforced shells, VGB-compliant drain covers, and a proper 8 AWG equipotential bonding grid on every job.
  4. Straight pricing up frontA written, line-item range and timeline before we break ground, with no moving numbers once we start.

Performanceprobiotics provides pool builders in Katy, TX, handling custom gunite pool construction, fiberglass shell installation, vinyl-liner pools, spa and hot tub integration, saltwater chlorination systems, pool decking, and variable-speed equipment automation. Our crews have shaped, plumbed, and finished backyards from the established streets around Mason Road to the newer sections of Cinco Ranch, and that firsthand history is the reason homeowners call us first.

Experience shows up in the details you never see once the water is in. A pool is a structural build, not a product you drop in the ground, and a shell poured over a proper steel rebar cage behaves very differently than one rushed to meet a schedule. We have watched Katy soil move, settle, and drain across every season since our first job, so we set footings, slope decks, and tie in the NEC 680.26 bonding grid the same careful way on every project along Fry Road or out toward Firethorne.

The portfolio does the talking. We have poured freeform gunite pools with tanning ledges and spillover spas in Grand Lakes, dropped one-piece fiberglass shells into tighter lots near Peek Road, and rebuilt aging plaster pools with pebble aggregate finishes that will outlast the standard white marcite by more than a decade. Every one of those builds started with a real conversation about how a family actually uses the water, not a catalog page. That is what a seasoned builder brings that a first-year outfit cannot.

We keep the money side honest from the first meeting. You get a written scope, a line-item range, and a clear timeline before a single foot of dirt moves, and we walk you through where a gunite build (roughly $60,000 and up) diverges from a fiberglass package or a vinyl-liner pool. Then we build clean, protect your yard and driveway, and hand back a finished pool with a startup walkthrough. Homeowners across the 77494 ZIP and the wider Harris County side of town keep sending us their neighbors, which is the only referral that matters.

Questions for a Veteran Pool Builder

How much does it cost to build an in-ground pool in Katy?
It depends on the build type. Vinyl-liner pools generally run $35,000 to $65,000, fiberglass packages $45,000 to $85,000, and a fully custom gunite pool starts around $60,000 and climbs with size, depth, and finishes. We give a firm written range after a free on-site consult.
What is the difference between gunite, fiberglass, and vinyl-liner pools?
Gunite is a poured concrete shell that can take any shape or depth and lasts the longest. Fiberglass is a one-piece molded shell with a smooth gelcoat and the fastest install. Vinyl-liner uses a membrane over wall panels and carries the lowest first cost. We build all three and help you weigh them for your yard.
How long does it take to build a pool from start to finish?
A fiberglass install can finish in a few weeks once the shell arrives. A custom gunite build runs longer because the shell must cure and every stage, from steel to interior finish and startup, is done in sequence. We hand you a real timeline before we break ground on Fry Road or anywhere else.
Do you handle the safety fence, gate, and drain covers?
Yes. We install code-compliant barriers at least 48 inches high with self-closing, self-latching gates, and every pool gets VGB-compliant anti-entrapment main drain covers. Child safety is not an upsell on our jobs, it is part of the build.
Can you renovate or resurface my existing pool?
That is a large part of our work. We chip out failing plaster and apply a new quartz or pebble aggregate finish that lasts 15 to 25 years, replace waterline tile and coping, and update drains to current standards. Many Katy pools we rebuild were poured decades ago.
Which Katy areas do you serve?
We cover Katy ZIP codes including 77449, 77450, and 77494, plus Cinco Ranch, Fulshear, Richmond, Cypress, Sugar Land, and Brookshire. If you are just outside that ring, call and we will let you know.
Why should I hire an experienced builder instead of the cheapest bid?
A pool is a structural build that sits in your yard for decades. Cutting corners on the rebar cage, the bonding grid, or the deck slope shows up as cracks and drainage problems years later, long after the low bidder is gone. Our crew has watched Katy soil move across every season, and we build for that.

The Build and Renovation Work We Do

One seasoned Katy crew for every stage of the pool, from a bare lot to a finished backyard, and for bringing an older pool back to life.

01Custom Gunite Pool Construction
Fully custom in-ground pools with a pneumatically applied gunite shell over a steel rebar cage, allowing any shape, depth, vanishing edge, or tanning ledge you can picture.
02Fiberglass Pool Installation
Factory-molded one-piece shells set on a compacted gravel base, plumbed, and finished with coping and deck. The smooth gelcoat needs no plaster and the fastest installs finish in weeks.
03Vinyl-Liner Pool Installation
In-ground vinyl-liner pools on steel or polymer wall panels with a custom-fit membrane liner. Typically the lowest first cost of the three build types for a Katy backyard.
04Remodeling, Resurfacing & Replaster
Chipping out tired plaster for a new quartz or pebble aggregate finish, fresh waterline tile and coping, and updated anti-entrapment drain covers on aging pools.
05Spa & Hot Tub Integration
An attached raised spa or in-pool spillover spa sharing the pool structure, with its own heater, blower, and jets tied into a smart automation system.
06Decking, Equipment & Automation
Travertine, paver, and stamped concrete decks plus variable-speed pumps, salt chlorinators, and app-controlled automation that runs pumps, heat, and lights from a phone.

Areas Our Seasoned Crews Serve

We build and renovate pools throughout Katy and the surrounding Harris County communities, from the master-planned neighborhoods to the nearby towns west of Houston.

  • Katy, TX (77449, 77450, 77494)
  • Cinco Ranch, TX
  • Fulshear, TX
  • Richmond, TX
  • Cypress, TX
  • Sugar Land, TX
  • Brookshire, TX

Not sure if we reach your backyard? Call (346) 391-7772 and we will tell you straight.

Investment Ranges for a Custom Pool

Pool pricing comes down to the build type, the size, and the finishes you choose. Vinyl-liner pools carry the lowest first cost, fiberglass packages sit in the middle, and a fully custom gunite build runs highest because every foot of it is shaped for your yard. Decking, spas, water features, and automation add to the total. The ranges below are typical for the Katy area, and we put the firm number in writing after a free on-site design consult.

Vinyl-Liner Pool$35,000 to $65,000 turn-key
  • Lowest first cost of the three
  • Liner replaced every 7 to 12 years
Get a range
Custom Gunite Pool$60,000 to $150,000 built
  • Any shape, depth, or vanishing edge
  • Steel-reinforced shell built to last
Get a range
Fiberglass Package$45,000 to $85,000 installed
  • No plaster, smooth gelcoat finish
  • One of the fastest installs available
Get a range

Sit Down With Our Lead Builder

Thinking about a new pool or a full renovation? Our lead builder will walk your yard, talk through gunite versus fiberglass versus vinyl-liner, and hand you a clear written range and timeline with no pressure. Decades of Katy backyards stand behind every recommendation, and we would rather build you the right pool than the cheapest one. Call and we will get you on the calendar.

Call (346) 391-7772